|
Tire Cleaner
|
Tire Cleaner's purpose is to strip off road grime, dirt, brake dust, and built-up tire dressings.
It needs to be strong enough to get the grime off, but must not damage the coating on your wheels.
Detergents can remove the natural waxes and carbon black from your tires -
be sure to use a penetrating tire cleaner.
|
Kutztown Car Wash Tire Cleaner ...
- Is a penetrating cleaner that will work it's way underneath the brake dust and grime,
thus allowing the high pressure wash to blast it off your tires.
- Will not harm/etch your wheels or tires.
- Is an alkaline solvent with a wetting agent.
- Is biodegradable.
- Is a bright flourescent yellow-green color.
- Smells like spearmint.
|
How to use Tire Cleaner
|
| Apply |
Step 1
|
Spray Tire Cleaner onto dry tires.
It comes out of the wand under low pressure - this is designed to help it stick
to your tires.
|
|
| Wait |
Step 2
|
Wait ...
You need to give the tire cleaner time to do it's job.
Leave the Tire Cleaner on your tires while you wash your car with the
High Pressure Soap or the Foaming Brush.
|
|
| Remove |
Step 3
|
When you are done washing the rest of your car,
use the High Pressure Soap cycle to blast the Tire Cleaner and dirt off your tires.
Put the high pressure wand very close - about 3 or 4 inches from the tire
to maximize the water volume and pressure that hits the tire.
|
|
| Next Step! |
Then...
|
Proceed to the next step in your washing process
|
|
| After |
Protect
|
After your car is clean and dry, apply a quality tire dressing to your tires
to make them last longer and look better. This is not just a cosmetic step,
it actually protects the rubber from ozone and UV sunlight.
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Tire |
Pre-Soak |
Foam Brush |
Soap |
Rinse |
Clear Coat |
Spot Free |
Dry |
Car Care |
|
|
|
